You have selected a set of tiles landscape, buying the perfect adhesive, prepare the layout and to leave room for expansion joints. To know about landscape type L visit https://www.bostondesign.com.au/residential
What now? It is time to start putting the landscape tiles in order.
Things that need to be
When can start placing the tiles anywhere you feel like. Some start from the side, while some others are starting from the center.
You can just walk on the tiles after they have been placed in a thin-set. Make sure that you have a second service to be used.
If not, you will have to wait outside all night for a thin-set tile is dry and firmly holds the landscape in places.
Choose the right shovel
the notched trowel is used to set the landscape tiles. You will get this trowel in any hardware store. Trowels are available with or without notches.
Select the people who have a notch attached to it. This will make the tile sit in a tight spot. The greater is the tile, a greater position to shovel will be needed. A 12 by 12 landscape tiles will require at least ¼ inch notch to shovel.
Deployment of thin-set
Deploying thin-set over a small area using a trowel. Cover most of the grid so that the tiles stick together for a long time. At the same time, do not apply the thin-set at angles where they intersect with each other.
Now, using the notched side of the trowel and apply thin-set. This will ensure that a consistent amount of thin-set applied and walking in the same direction.