Earthing rod is a tool to distribute the electrical charge of power flow, as its name indicates. Earthing rod's function is to complete a zero potential electrical path between a distribution system and the earth. In order to provide a neat and non-hazardous atmosphere, it's necessary to connect the earthing cable to the ground system at the earthing terminal points in areas like the basement, garage, fields, etc.
Earthing rod is metal rods that help you to get direct contact with the earth, which is a potential zero-potential ground. The earth is a little different from every other material that has ever been discovered on the planet. It contains an unlimited source of electrons. This results in the earthing rods having their surface at minus one volt. The surface of any conductor, when placed in contact with a good conductor, offers infinite resistance to the flow of electric current. In the case of plant life and the animal body, it charges up the body just like that of conductors, capacitors, and other devices. The result is a lot of problems in life. For example, insomnia, irritation, hyperactivity, carvings pain, and many other similar issues can be traced back to stress and exhaustion caused by this charging effect (positive ions)
Earthing rod is a kind of grounding system which is used to provide a common path to the earth via buried copper pipes or rods. It can be used in place of earthing wires that provide pathways allowing the current to go easily between weatherproofed conductive surfaces and the excavated earth.
Earthing rod is a metallic rod that is used for grounding the electrical circuit. These rods are installed in areas where there is a high risk of electric shock. It acted as a barrier between the human body and charged parts, making sure that dangerous charges did not find their way to the human body.
3 Types of Earthing Rods
There are different types of Earthing Rods available in the market. These rods are made from different materials and have different features. The following are some of the most common types of earthing rods:
1. Stainless Steel Earth Rods
Stainless Steel Earth Rods are used for bonding of the ground rods to the ground surface. This will give a long life to the system and avoid corrosion. The stainless steel rods are available in different diameters, lengths, and materials.
Stainless Steel Earth Rods are highly recommended for use in highly corrosive environments like saltwater areas or industrial areas where there is a large amount of dust present. These rods can withstand any kind of weather condition and will not corrode easily. It is also easy to install these rods as they have pre-drilled holes which can be easily drilled deeper into the ground without any difficulty.
2. Solid Copper Earth Rods
Solid copper earth rods are typically installed at least three feet below ground level and then driven into the ground vertically with a hammer drill. The rod should be driven into the ground until it is approximately one-half buried or approximately six inches below grade if you are installing it on a slab. These rods will provide an excellent connection to your home's grounding system, but they do require some maintenance over time because they can corrode over time due to exposure to moisture and other elements in your yard or garden area
3. Copper bond Earth Rods
Copper bond Earth Rods are the most common type of rod used in residential and commercial applications. These rods are made with a copper alloy that can withstand high temperatures, making them the best choice for industrial or commercial applications. These rods are also commonly used for grounding systems that are not exposed to moisture or other environmental elements. The copper in these rods is bonded with another metal that prevents corrosion during installation and use. Copper bond Earth Rods come in lengths from 24 inches to 120 inches and can be cut to size if needed.
